Standing seam roofing tools
The Standing Seam Roofing Tool is engineered to make installation of standing seam metal roofing quick and easy. These tools will allow you to attach the panel seam to the previous seam, which means you can do all the work while standing on top of the roof instead of climbing up and down a ladder.More..
Electric seaming machine ESM-1 is used for closing double standing seam lock while roofing installation process. Electric seaming machine closes roofing lock much more faster comparing manual hand seamers. Seaming machine has four pairs of rolls to close double standing seam lock step by step at first 90 degrees and after to 180 degrees. So you can really save your working time using our electric seaming machine ESM-1. Because if you close lock with hand seamers you have to close all the roof with first number of hand seamer and after to make second operation closing lock to 180 degrees with second number of hand seamer. Electric seaming machine makes it by one operation. There is a reason to use ESM-1 machine when you have big length panels and big roofing distances. Electric seaming machine helps to save your time on doing closing operations. Rolls of electric seaming machine ESM-1 are covered with special anti-slip material so it doesn’t slip while working. The weight of electric seamer is not more than 30 kg, so it’s possible to work one person with the machine. Before using our machine for closing double standing seam lock the beginning of panel has to be prepared: it has to be closed with first number of hand seamers. The length of prepared part of panel has to be enough to install the machine. After installing ESM-1 machine on the roofing panel you have to fix it with special fixation handle and after you can turn. The machine works from 220V electric lines. Very often our customers purchase electric seaming machine with roll former standing seam machine, floor decoiler. To get more information about our machines please contact us
Standing seam hand seamers for double standing seam are used for closing locks on a double standing seam roofing panels. It consists from two tools: First step hand seamer for bending 90-degree lock. Second step hand seamer for bending 180-degree lock. Before closing, the roofing panels have to be profiled with roofing seam machine and install on the roof. When panels contact each other, the side shelves of panels cover each other so there is one big construction with non-closed seams between panels. To close those seams and make them waterproof we recommend to use special closing tools such as hand seamers HS 1 and HS 2. The process of seam bending starts from a first stage hand seaming tool. This tool bends lock to 90 degrees. You have to lay it over the lock. You can start from the bottom of the roof or from the top of the roof and go down. Make sure that tool down is tighten to the seam, push your paddle all the way down, lift it up and sly down on the distance of the length of the tool, and continue down the paddle. It gives you a first bend. So now you can use number two hand seamer. Lay it on the seam. You can choose to start it from the upper or from the down part of the roof. You can make a first bend to 180 degrees. So sly the tool down and finish the second stage of bending the lock all the way down to the bottom of the seam. Get it to the end. You may kind of let it be free but we recommend to bend it a couple of times to hit that last edge of the seam real tight. So there is double locked seam closed. The difference that makes our hand seamer much more better than other seamers is the ability to keep tight the material, not to let it slide while working. You can use our hand seamers to close double standing seam locks on the straight roofs and on the roofs with radius panels. We can also propose you to use our electric seaming machine, so you will be able to close double standing seam lock faster in one step operation.