$0.00
Checkout
Model: NM-3
Corner notcher NM-3 is used by enterprises who specialize in manufacturing of facade cassettes with different configurations and complexity. It allows you to optimize the preparing process, saving time on the corner punching operations of the future ..
The material thickness (mm): 1.2
Control type: Manual
$1 250.00
Add to Cart
Model: SM-1250х8
Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine.
This ..
Material width (mm): 1250
Numbers of the strips : 8
The material thickness (mm): 1
$4 500.00
Add to Cart
Model: SM-350
In this variant of electric cutting machine our customer desired to cut metal sheets from width 350mm into 12 strips. The width of one strip is 31.4mm
Maximum metal thickness 1 mm
Numbers of the strips – 12
The diameter of the roll..
Cutting speed (meters/minute): 10
Numbers of the strips : 12
The material thickness (mm): 1
$3 700.00
Add to Cart
Model: DM-10
Decoiler of metal is the machine that is used to work with other machines such as: length cutting machines, shears, plate rolling machines, folders, forming machines etc.
Decoiler of metal is good when you need to prepare metal for further wor..
Material width (mm): 1250
The maximum weight of the roll (ton): 10
The maximum outside diameter of the roll (mm): 1400
$2 300.00
Add to Cart
Model: EEM-200r
Electric elbow bending machine EEM-200r is used to bend elbows from rectangular and round pipes with different sizes. Pipes have to be made from metal sheets up to 0.7mm thickness. Lock of the pipe can be welded or closed with lock closing machine. E..
The diameter of the pattern (mm): Min:80х60; Max:125х125
The material thickness (mm): 0.7
Control type: electrical
$3 800.00
Add to Cart
Top sales
Popular
Recommended
Model: EEM-200
On the base of the electric elbow machine EEM-150 we designed elbow forming machine EEM-200 that could work with the pipes not only in the range 80-150mm but also in the range 150-200mm (with the upper lock on the pipes).
Elbow forming machine..
The diameter of the pattern (mm): 80-200
The material thickness (mm): 0.6
Control type: electrical
$4 200.00
Add to Cart
Model: EEM-150
Electric Elbow Machine EEM-150 150 is used for crimping elbows from round and rectangular pipes that are used in process of assembling ventilation and drainage systems. The corrugated elbow looks fancy and it could be produced from the pipes with dif..
The diameter of the pattern (mm): 80-150
The material thickness (mm): 0.6
Control type: electrical
$3 500.00
Add to Cart
Model: EEM-200plus
Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipe from all four sides while bending and provides better quality of elbow. Electric elbow making machine is the m..
The diameter of the pattern (mm): 80-200
The material thickness (mm): 0.7
Control type: electrical
$4 500.00
Add to Cart
Model: ESM-1
Electric seaming machine ESM-1 is used for closing double standing seam lock while roofing installation process. Electric seaming machine closes roofing lock much more faster comparing manual hand seamers. Seaming machine has four pairs of rolls to c..
The material thickness (mm): 0.7
Control type: electrical
Power (V): 220
$1 800.00
Add to Cart
Model: LSCM 1300x1.2
Lock seam closing machine LSCM 1300x1.2mm is used for closing single lock on pipes with inside diameter from 80mm, maximum length 1300mm and maximum metal thickness 1.2mm. There is special moving closing mechanism on the machine which contacts with r..
Material width (mm): 1300
The diameter of the pattern (mm): 800
The material thickness (mm): 1.2
$1 600.00
Add to Cart
Model: MB-3150
The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another con..
Material width (mm): 3150
The material thickness (mm): 0.7
$2 000.00
Add to Cart
Top sales
Popular
Recommended
Model: MEM-150
Manual elbow machine MEM-150 forms elbows from round pipes that are used in process of assembling ventilation and drainage systems. The corrugated elbow looks fancy and it could be produced from the pipes with different diameters. There are two types..
The diameter of the pattern (mm): 90-150
The material thickness (mm): 0.7
Control type: manual
$2 800.00
Add to Cart
Model: MG-1250
Manual guillotine metal shearing machine MG-1250 is a machine for cutting metal sheets 1250 mm length and 1mm maximum thickness for pieces. Manual guillotine metal shearing machine is a machine that used mostly for preparing operations. The goal of t..
Material width (mm): 1250
The material thickness (mm): 1
$1 800.00
Add to Cart
Model: MPBM 1300x1.5
Manual plate bending machine MPBM 1300x1.5 was created to work with sheet metal up to 1300 mm length and 1.5 mm thickness. This machine is widely used while pipe production with cylindric and round shape with different diameters and sizes. Those prod..
Material width (mm): 1300
The material thickness (mm): 1.5
Control type: manual
$2 250.00
Add to Cart
Model: MG-2100
Manual guillotine shear MG-2100 is designed to cut sheet metal with a thickness up to 1 mm and a maximum length of 2100. To provide high quality cutting, the machine is equipped with a special locking mechanism, which allows fixing the metal before c..
Material width (mm): 2100
The material thickness (mm): 1
$2 300.00
Add to Cart
Model: MB-1400
Segmented bending machine for making façade cassettes, boxes etc.
Maximum length 1400mm
Maximum metal thickness for bending - 1.2mm
Maximum metal thickness for cutting -0.8mm
A manual sheet bending m..
Material width (mm): 1400
The material thickness (mm): 1.2
$2 300.00
Add to Cart
Model: NM-2
Notching machine NM-2 for façade cassettes is used to cut multi angles in metal sheets up to 1.2 metal thickness. Multi angles are necessary to be made for further bending metal sheet in boxes, façade cassettes etc., so bending can be d..
The material thickness (mm): 1.2
Control type: Manual
$1 100.00
Add to Cart
Model: SM1550x1.7
Pan & box brake SM 1550x1.7 mm is a machine for bending different elements from the metal sheets with maximum length 1550 mm and maximum metal thickness 1.7 mm.
Usually brake machines are used for producing roofing elements, ventilat..
Material width (mm): 1550
The material thickness (mm): 1.7
$2 800.00
Add to Cart
Model: SM3-1270x2
Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bot..
Material width (mm): 1270
The material thickness (mm): 2
$2 900.00
Add to Cart
Top sales
Popular
Recommended
Model: EPRM-1.3
Plate rolling machine is used for bending pipes from the metal sheet with maximum length 1.3m and maximum thickness 1.5mm. Pipe production takes place by rolling the sheet metal between the rollers of the plate rolling machine. The upper roller of th..
Material width (mm): 1300
The diameter of the pattern (mm): 72
The material thickness (mm): 1.5
$2 500.00
Add to Cart
Model: f3
Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems.
Double standing seam roofing system is an unique technology, that has a purpose to avoid..
Material width (mm): 250-700
The material thickness (mm): 0,8
Power (V): 220/380
$5 700.00
Add to Cart
Model: fm
Profiling machine FM for double standing seam panels is used for making double standing seam lock of the roofing panels that are used for installation of the double standing seam roofing.
The double standing seam roofing is widely used because it&..
Material width (mm): 250-700
The material thickness (mm): 0.7
Power (V): 220/380
$4 100.00
Add to Cart
Model: punching press corner
Punching press for façade corner cassettes is used in the production process of special configuration facade cassettes for covering corners of different buildings. At the beginning of the manufacturing process, sheet metal is cut into blanks o..
The material thickness (mm): 1
Control type: Manual
$1 100.00
Add to Cart
Model: MR-10t
Recoiler of coil metal MR-10t was designed for maximum 10 tons coils to recoil strips after it was cut on cut-to-length slitting machine. Recoiler MR-10t is widely used in semi-automatic cut-to-length slitting lines equipped with decoiler, cut-to-len..
Material width (mm): 1250
Numbers of the strips : 20
The maximum weight of the roll (ton): 10
$2 800.00
Add to Cart