Double standing seam roofing machines

Double standing seam roofing machines
TOP
TOP

Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Double standing seam roofing system is an unique technology, that has a purpose to avoid penetration of water inside the roofing panels. It’s could be possible thanks to special roofing design. Double standing seam roofing panels when they are installed on the roof, cover each other, so there aren’t any spaces between them. To make places of roofing panels contact waterproofing, the seams between panels usually are closed by special seaming tools: hand seamers or electric seamer.  There are two types of the portable machines for double standing seam systems we make: Portable machine F3 for double standing seam systems   Portable machine FM for double standing seam systems There are some important differences between portable machine F3 and portable machine FM Roofing machine F3 has 6 pairs of forming rolls unlike profiling machine FM with 5 pairs of forming rolls. So the quality of roofing panels is better with machine F3. Adjusting of width of roofing panel is easier with portable machine F3, thanks to special constructive moments. With machine FM it takes much more time. The weight of machine FM is less so it’s easier to transport it from one place to another.   Our customers have opportunity to order portable roofing machine F3 in standard set. Or if it’s necessary you can order additional options such as: cross cutting knife, additional rolls for ribbed panels, additional rolls for radius panels, hand seamers or electric seaming machine, decoiler.   According to our customer’s preferences, we can offer portable roofing machine F3 for standing seam systems for using with 220 or 380 electric lines.    As an option our customers can purchase slitting machine with our portable machine F3   


Material width 250-700mm :: The material thickness Steel - 0,8мм, aluminium - 1,5мм :: Power 220-380V :: Engine power 1.1-1.5kW 
TOP
TOP

Profiling machine FM for double standing seam panels  is used for making double standing seam lock of the roofing panels that are used for installation of the double standing seam roofing.  The double standing seam roofing is widely used because it’s impossible for the water to get through closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (hand seamers for single lock and double lock and electric seamer) The operator has to change the position of every roll separately in order to change the width of the double standing seam roofing panel   Profiling machine FM for double standing seam panels is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This Profiling machine for double standing seam panels has five pairs of forming rolls.  This Profiling machine for double standing seam panels could be produced for using with 220V or 380V electric lines.  You can also purchase with our Profiling machine FM for double standing seam panels: additional pair of rolls for making ribs on the double standing seam roofing panels; additional pair of rolls for making double standing seam roofing panels with a big radius of bending; cutting knife; metal decoiler; handle seamers; electric seamer; steel slitter; It’s easy to work with our Profiling machine FM for double standing seam panels right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this double standing seam forming machine FM. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation.  Our enterprise has started producing of this profiling machine FM for double standing seam panels since 2005 so we have great experience in doing our job and can propose you a great solution for your business.  To get more information about the price of this profiling machine FM for double standing seam panels  and the way it could be delivered to your location just contact us. We will give you all the information you need    


Material width 250-700mm :: The material thickness 0.7mm :: Power 220V or 380V (depends on costumer’s preferences) :: Engine power 1.1kW 
NEW
NEW

Ribbed panel forming machine RPFM is used to form ribs on double standing seam roofing panels while double standing seam roofing production process. Standard standing seam roofing panels are formed with roll former roofing machine without ribs, but as extra option you can install rolls for ribbed panels on machine and form two ribs on the center of panel, providing more rigidity and giving interesting look to your roof. But while building houses of various configurations and using different kinds of material for roofing sometimes it’s necessary not to increase rigidity of roofing panel but change slightly design of it. For this task we offer special designed ribbed panel forming machine RPFM which lets to get small ribs on finished roof panel over the entire width of panel. As a result, such panel looks very interesting on the roof and façade of building, decorating its unusual design and distinguishing it from other buildings.  Also ribbed panel forming machine can help to hide defects of low-quality material, as forming ribs on panel and smooth all the roughness.   Ribbed panel forming machine RPFM is designed to work with roofing panels maximum 625mm width. But, if necessary, it’s possible to adjust machine to forming more narrow panels by removing unnecessary number of forming rolls. Ribbed panel machine is used in combination with roll former standing seam roofing machine. So, roofing panel of necessary length and width has to be pre formed with standing seam roofing machine and after you can make ribs on panel with ribbed panel forming machine RPFM.   


The material thickness 0.8mm :: Engine power 1.1 kW 

Roll forming roof panel machine F3 is roofing equipment that is used in process of standing seam roof panel production and standing seam roofing installation. With help of electric motor torque goes from motor through sprockets and the connection chains to the rolling rollers of the machine making them to rotate and form necessary profile. In order to protect workers while working with roll forming roof panel machine, we offer to equip it with standard side covers and additional top part cover to protect forming part of machine. So, using standing seam roofing machine F3 with protective covers operators of machine will be protected from injury, and machine would be protected from any outside object to get into working mechanism.  However, while working with roof machine, it’s possible to take off upper cover and leave side covers of machine while working. If upper cover isn’t needed you can purchase machine without it.  Our roll former standing seam machine is light and mobile one so you can work with it at your workshop or directly at roof installation place saving money on transportation expenses.  Roll forming roof panel machine F3 has special adjusting screw to adjust machine for different panel width production. You just need to rotate adjusting screw to get necessary panel width sizes. Standing seam roof machine F3 can work with different materials such as steel, aluminum, copper. Machine can be adjusted to roll different metal thicknesses.  


The material thickness 0.8mm 
TOP
TOP

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing.  The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock).   The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels.  So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing  panels. This machine could be produced for using with 220V or 380V electric lines.  You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation.  Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business.  To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.


Material width 250–700mm :: The material thickness Steel - 0,8мм, aluminium - 1,5мм :: Power 380V(220V) :: Engine power 1.1/1.5 (kW)