Guillotine shearing machines

Manual guillotine metal shearing machine MG-1250 is a machine for cutting metal sheets 1250 mm length and 1mm maximum thickness for pieces. Manual guillotine metal shearing machine is a machine that used mostly for preparing operations. The goal of those operations is to get the metal sheets with necessary dimensions for further operations such as bending, cutting, forming, punching etc.   To avoid moving of metal while cutting, there is a special press-fixation system, so the metal sheet is fixed while cutting and the quality of cutting is high. There are special adjustable fixators behind the manual guillotine shear so you can get one size all the cut pieces. This way of cutting with using fixators behind the manual shear provides better quality of cutting than way of cutting with using marks on the metal sheet. The cutting knives of the manual guillotine shear are tempered and polished. They have four working edges, so when the one of working edges is not sharp enough you can change it to another one by rotating the knife and continue the process of guillotine using. We produce four models of manual guillotine shears Manual guillotine metal shearing machine MG-1250mm; Manual guillotine metal shearing machine MG 1500 x 1mm; Manual guillotine metal shearing machine MG 2010 x 1mm; Manual guillotine metal shearing machine for cutting trapezoidal panels; To cut the metal sheet with our manual guillotine metal shearing machine you have to put the metal on the guillotine table and move it to the fixators behind the shear. Before you have to place fixators to the length-position you need, so the cut pieces will be one length-size according to the position of fixators. After you have to turn the handle of pressing-fixation system and fix the metal sheet with it. So the metal sheet will be fixed while cutting. After you can cut the metal by using the cutting handle.  Manual guillotine shears are widely used in process of working with other machines such as: decoilers, slitters, bending machines, plate rolling machines, forming machines etc. We have started producing of manual guillotine shears since 2003 y. So we have a great experience in shears producing and can propose you a perfect solution for you tasks.